The Hitachi C10fr Jobsite Table Saw Review is About One of the Most Powerful Table Saws in the Market. It Doesn’t Matter if You’re a Builder or Woodworker, the Hitachi C10fr Might Be Just What You Need
What We Like
- Strong metal rip fence
- Electric brake
- A Direct drive 15-Amp motor
- Soft-start function
- 0 to 45 degrees bevel range
- Telescoping table extension
- Foldable and rollable stands
What We Don’t Like
- Loose meter gauge
The Hitachi C10FR Table Saw or Metabo HPT, as it is now called, is one of the most affordable table saws in the market. Our Hitachi C10FR Jobsite Portable Table Saw review shows that it has a lot of amazing features that make it stand out from other table saws in the market and it can be used by homeowners. Unfortunately, we also found out that it is not ideal for heavy-duty carpentry because it is lightweight and has a loose meter.
A powerful table saw makes your work easy because you don’t need to cut your materials into small pieces with a handheld saw. They provide support while you cut the wood allowing you to get a more accurate cut. There are many so many table saws out there but this piece is about one of the best.
It is a Hitachi portable table saw review that addresses all the features of the Hitachi C10FR Table Saw. It is important to note that the Hitachi C10FR Table Saw is now called Metabo HPT.
These are features you need to consider if you intend to buy the Hitachi Table Saw for a project in your home or workplace. Our Hitachi C10FR review doesn’t just address the good parts of the saw. It also lists the disadvantages so you can compare both and make a decision.
Related Reading: DeWalt DW745 Table Saw
Hitachi C10FR Table Saw Features
- Self Aligning Metal Rip Fence
- Direct Drive 15-Amp Motor
- Foldable and Rollable Stands
- Electric Break, And Emergency Power Switch
- Soft Start and Telescoping Table Extension
- Quick and Easy Adjustment
Self Aligning Metal Rip Fence
One of the best features of this table saw is its metal rip fence which is self-aligning to guarantee firmness while you’re cutting wood or metal. Combined with the quick-lock mechanism, you can rest assure that each cut will be as accurate as possible.
We noticed that this metal rip fence plays a great role in ensuring great results and compared them to other brands like BOSCH, SKIL and DeWalt. All the brands with strong metal rip fences offered high accuracy. The miter gauge also make sure stability while you’re cutting even if they aren’t as tight as they ought to be.
Direct Drive 15 Amp Motor
Power is another essential factor you should consider when you’re picking a table saw. The Hitachi power saw produces 4000 RPM from its 15-amp motor. With 4.4 horsepower, the 10-inch 36-tooth blade can be used to cut through the hardest material without any problem.
The tip of the blade is made of carbide and you can change it without using a wrench. The voltage is 120 while the wattage is 15, both of which are standard for a table saw of this size.
Foldable and Rollable Stands
Since it weighs 96 pounds, it comes with a foldable stand that is strong and rugged. This allows you to haul the Metabo HPT saw around without straining your back. The rollers attached to the stand are made of plastic.
You can roll the table saw from place to place and store it when you’re not using it. You can roll it on smooth and rough surfaces alike. It is important to note that a better alternative to the plastic rollers would have been rubber rollers as they offer more stability than the plastic rollers that were used.
Related Reading: BOSCH GTS1031 Jobsite Table Saw
Electric Break, And Emergency Power Switch
When it comes to using power tools, you can never be too careful. A small misstep can lead to serious injury. Some of the safety mechanisms of Hitachi are the electric brake, emergency power button, and large cover that protects the button.
You can use either the electric break or the emergency power switch to put it off when you find yourself in a tough spot. There is also a splitter attached to the table saw where the pieces of wood or metal are secured when you’re cutting. This keeps your workspace clean and prevents congestion which is usually hazardous in the workplace
Soft Start and Telescoping Table Extension
Another problem with most table saws and even chain saws is noise. Thanks to the soft start feature of the Hitachi table saw the noise is reduced significantly. Also, the power tool recoils as soon as it is put on.
It has a ripping capacity of 22 inches to the left and 35 inches to the right. This is why it is a good option for homeowners. Commercial table saws usually have wider ripping capacity than the Hitachi Table Saw.
Quick and Easy Adjustment
While you’re working, you can easily reach the adjustment knobs for the bevel height and scale as it is right in front of the cabinet. You can reach out and make the necessary adjustments while working.
Whether you want to make it higher, lower, or tighter, all you have to do is check the knobs and pick the one that fits your agenda. The bevel range can be adjusted between 0 and 45 degrees.
Related reading: SKIL 3410-02 Table Saw
Hitachi C10FR Table Saw Review: in Conclusion
The verdict of our Hitachi C10FR Jobsite Table Saw review is that Metabo HPT is a great table saw but it is not without its faults. While it has several pros like the strong rip fence, foldable table telescoping, electric brake, and other safety features, it would be unreasonable to ignore the disadvantages.
Two of the most discouraging things about the Hitachi C10FR Table Saw are the loose meter and the lightweight. Since the product is lightweight, it cannot be used to cut certain large and heavy items.
Also, the loose meter affects its stability while you’re working. So, if the weight is too much, you’ll find the saw moving backward or sideways depending on where the pressure is coming from. If you don’t have a problem with this, you can proceed to make a purchase.