The Hitachi C10fshc 10″ Sliding Compound Miter Saw is a Great Cutting Tool With Zero Clearance and Rear Clearance Features
What We Like
- Zero clearance and rear clearance for maximum flexibility
- Accessible controls
- 15 AMP direct drive motor
- Dust collection port, LED and laser marker
- Compact slide system
- Soft start
- Dual bevel and bevel lock
What We Don’t Like
- Plastic cam lock
At a glance, the C10FSHC is a beautiful saw with many great features. As you can see from our Hitachi C10FSHC 10″ Sliding Compound Dual Bevel Miter Saw review, the flexibility you get when you use this saw is commendable.
The LED light can brighten up your workspace and the laser beam can help you make more precise cuts.
However, the product has a plastic cam lock which is less durable than an aluminum cam lock.
For homeowners who don’t have high volume projects, the Hitachi 10″ Sliding Compound Saw with laser might work for you.
However, it isn’t strong enough to be used commercially or in a construction site. This is discouraging since the saw costs almost $800.
Working on projects in your workshop can be time-consuming and stressful on your legs, back, shoulders, and arms depending on what you’re doing.
Thankfully, power tools were invented to make the process easier and more efficient. A typical example of a time-saving power tool is a sliding compound miter saw.
These saws allow people to make accurate cuts any time of the day at the comfort of their homes. Some saws are even more efficient than others.
The Hitachi C10FSHC 10″ Sliding Miter Saw provides a level of comfort that only a few saws can offer.
Among other things, the Hitachi 10 inch slide miter saw has zero clearance and rear clearance slid systems allowing users to cut while they are sitting down or while the saw is up against the wall.
Related Reading: Genesis GMS1015LC Compound Miter Saw
Features of the Hitachi C10FSHC 10″ Sliding Compound Miter Saw
Dual-Bevel, Positive Stops and Bevel Locks
Like many other great saws, the Hitachi C10FSHC comes with a dual bevel system that allows you to make angled cuts of 48 degrees to the left and 48 degrees to the right.
The bevel adjustment can be done from the front of the machine. So, you don’t need to reach to the back of the saw to reach the controls.
All the major controls of the Hitachi C10FSHC 10 are located in the front. The positive stops make bevel adjustments easier and quicker.
You can dial in the precise angle you intend to get. You can bypass all the detent stops and get your angles faster and accurately.
Optimal Flexibility and Ergonomic Design
As stated above, the Hitachi C10FSHC is extremely flexible. Apart from the dual bevel that is secured with the bevel lock, the Hitachi C10FSHC 10″ Sliding Compound Miter Saw comes with zero rear clearance.
This is a sliding system that is different from the typical sliding system you find on other miter saws.
Since the Hitachi C10FSHC 10″ has a zero rear clearance, the sliding head moves along fixed rails while maintaining the range of motion.
So, you can use the saw while you’re on a chair or when the saw is against the wall. It can also be used on smooth and rough surfaces with little to no effort.
You can set the saw on a bench during use if you don’t have a table. The range of motion with the zero clearance system is 0 to 60° to the right and 0 to 55° to the left.
The clearance system also increases the lifespan of the saw by reducing wear and tear.
15 AMP Direct Drive Motor
The Hitachi C10FSHC 10″ Sliding Miter Saw with laser comes with a strong 15 AMP direct-drive motor. The motor allows trim and frame hardwood like oak, lumber, and poplar.
It has a carbon brush that increases productivity by allowing you to make quick and easy changes to the miter saw while working. The amp motor is controlled by a soft start feature.
So, it is not going to stall. All you have to do is push the button softly and the machine will start. If it doesn’t start instantly, there must be a problem within.
When you need to stop for any reason, all you have to do is use the electric brakes. The electric brake takes a few seconds to stop the motor but brakes that stop saw motors instantly are the best, especially when there is an emergency.
Related Reading: Milwaukee 6955-20 Sliding Miter Saw
Dust Collection Port, LED and Laser Marker
The Hitachi C10FSHC 10″ Sliding Compound Miter Saw comes with a dust bag. This dust bag is attached to the rear of the machine.
It takes up more than 50% of the debris created while you work with the saw blade. Some of the saws have dust bags that take up to 70% of the debris while you’re cutting.
However, you can make the dust collection system on the C10FSHC 10″ Sliding Compound Saw more efficient by connecting it to a shop vac.
There is an LED light on the device that is useful when you’re working in dark places like the basement or when you simply need light shining closer to the board.
To improve the precision of each cut, you can use the laser marker in addition to the other features on the C10FSHC 10″ Sliding Miter Saw.
The laser is supposed to be adjustable but making the required adjustment isn’t usually easy. This is one of the disadvantages of the Hitachi C10FSHC 10″ Sliding Compound Miter.
Related Reading: Hitachi C12RSH2 Miter Saw
Hitachi C10FSHC 10″ Sliding Compound Miter Saw Review The Verdict
The Hitachi C10FSHC 10″ Sliding Compound Dual Bevel Saw review shows that it is a great product for homeowners but it may not be an ideal option for professional woodworkers who handle heavy-duty jobs.
The cam lock is made of plastic so you can’t rely on its durability. Also, the saw weighs about 46 lbs which is heavy for a sliding miter saw.
Most miter saws with the same capacities weigh between 30 and 35 lbs. Let’s not forget to mention that you’ll need around $780 to $800 to buy one.